Mantis - 1/8 Truggy

Mantis（マンティス）は、ロビトロニックが自信を持っておすすめする、高性能1/8レーシングトラギーです。 ビギナーからエキスパートドライバーまで、すべてのユーザーに満足いただける性能と品質に仕上げてあります。

取り扱いやメンテナンス性に優れ、各所の素材、デザインにこだわり高い耐久性も兼ね備えています。 フローティングギアボックス、シールドされたセンターギア、ジオメトリー調整可能なサスペンションなどが標準でフルオプション仕様となっています。 エンジンもアキシャルの28（Axial4.6)ビックブロックを搭載しており、パワフルな走行が楽しめます。

工場組立済みシャーシ

工場組立済みで、サスペンション等のセットアップも完了しています。ボディもペイント済みで、お好みのメカを搭載するだけのイージービルトです。 キットには、プラグレンチ、燃料注入ボトルなども付属しています。別途送受信機、サーボ、バッテリーをご用意ください。

特徴

• 3mmアルミシャーシ
• アルミアッパーデッキ
• シャフトドライブ4WD
• パワフルなAxial .28 プルスターター付エンジン
• アジャスタブルサスペンション
• フルシールドベアリング
• 強化アルミショックアブソーバー
• アルミショックタワー
• 強化樹脂サスペンションアーム
• ポリッシュ処理のチューンドマフラー
• 密閉式メカボックス
• 密閉式センターギアボックス
• 2ステージエアフィルター
• 低重心デザイン
• 4べベルギアデフ
• デュアルディスクブレーキシステム
• Axialトラギー用タイヤ
• 軽量 Axial ディッシュホイール
• 塗装済みボディ
• ユニバーサルジョイント標準装備

Big block power

The Axial 4.6 big block engine is extremely powerful. With a super-size heat-sink you will never have issues with high temperatures and overheating. A high-flow dual stage air filter protects the engine from contamination. Tuning and adjustments are simple and you can have this truggy up and performing in a short amount of time. The engine is equipped with a pull start system, so no need for an expensive starter box. The polished tuned pipe is very lightweight and has been tuned to the engine for maximum power. Axial is an established name in the marketplace so support is only a call away if needed.

Handling

The Mantis chassis was designed for an ultra low center of gravity, to be lightweight and have maximum suspension travel. The result is a very easy handling chassis right out of the box and with all the options for setup you can fine tune it to your driving style and track conditions. Long oil-filled 14mm piston aluminum shocks with 3.5mm shafts and super strong composite suspension arms let the car fly over bumps and jumps. The heavy duty aluminum shock towers are strong and allow multiple shock positions for further tuning. All the suspension pins are supported in rubber bushings; this elastic connection avoids damage to the suspension during severe use. The Mantis has three low profile differentials all with a 6 hardened metal gears. The aluminum-top deck is ultra low further adding to the low center of gravity. The Axial Mantis body is low for maximum air flow around the engine. All this adds up to a strong performing chassis with performances advantages you can feel right out of the box.

Fully Adjustable

The Mantis offers a wide range of tuning adjustments so that you can fine tune your truggy to any driving condition. All important suspension points are easily adjustable.

• 36 possible shock positions available to fine tune your suspension
• Spring-clips for adjustment of ride height
• Adjustable front and rear camber
• Adjustable steering geometry
• Front inboard toe angle adjustments: 0° to -2°
• Rear inboard toe angle adjustments: 0° to -2°
• Front kick up angle adjustments: 0° to 2°
• Rear anti dive angle adjustments: 0° to 2°

Maintenance

The Mantis has been designed for easy access to all important components of the car. All 3 differentials are within easy reach; if you need to access them simply remove 4 screws. The engine and pipe assembly can be pulled out by removing 4 screws. Reaching the steering and suspension adjustment points require removal of only a couple screws each.

Performance Features

• Single speed transmission for maximum performance at the track with the Axial 4.6 big block engine
• 6 gear hardened metal differentials
• Lightweight chassis and components for optimum agility and handling
• Adjustable steering geometry
• Sway bars included for front and rear
• Vented steel disk brakes for maximum breaking
• Super low aluminum upper deck and low mounted components
• Low profile differentials
• Aerodynamic body for high speed and good airflow
• Clean chassis bottom with countersunk screws and seamless transition to the chassis side-guard
• Full set of universal joints (front, rear, center front, and center rear)
• Axial Fuel Filter

Durability Features

• All gears in drive train are hardened steel
• Super-durable suspension and shock towers
• Long composite shocks with diaphragms
• 17mm Wheel Hex Hubs
• Fully closed drive-train

Additional Features

• Wire routing for servo leads and receiver
• 150cc fuel tank with splash guard and drain
• Included transponder mount, allows use of all AMB transponders
• Dust-sealed receiver/battery-box

Specification
全長:	550mm
全幅:	415mm
ホイールベース:	368mm
全高:	190mm
トラック:	380mm
燃料タンク容量:	150cc

Option Parts

In addition to the all the standard parts available Robitronic has developed many option parts to offer additional tuning and performance options for the Mantis. The experienced beginner can start racing with many Aluminum and Carbon Fiber parts. Aluminum Shock Towers, Hubs, Universal Shafts, Sway Bars, Turnbuckles, Aluminum Shocks, machined gears, milled super strong chassis plate and milled engine mounts are among a few. Keep your eyes open for more information as we start releasing these parts into the marketplace.